APC NetShelter Rack Automatic Transfer Switch (ATS) AP4421A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4421A is single phase 1U Rack ATS with 10A rated current, 230V rated voltage and 2000VA load capacity. It comes with 2 IEC C14 inlet and 12 IEC C13 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.

Increase availabilityAn APC Rack Automatic Transfer Switch makes it possible to connect single-powered hardware to two different power sources, in order to increase the availability of this connected hardware and prevent costly downtime. Because an APC Rack ATS uses two input power cords (not included), it can be connected to two different power sources at the same time. By then connecting single-powered hardware to the Rack ATS, this hardware can have access to 2 separate power sources. If one source fails, the Rack ATS immediately switches to the second feed, without the connected hardware being affected.Easy to useYou can read the status of the APC Rack ATS at a glance via the front panel interface, but you can also manage it remotely thanks to its built-in network management functionality.ConvenienceBecause this Rack ATS is equipped with multiple outputs, multiple single-powered devices can be connected to the ATS at the same time, so that all benefit from the security of two feeds.SafetyThe built-in intelligent interface allows this APC rack ATS to monitor both input power sources, detect deviations in voltage or frequency and then take a user-defined action, such as sending an alarm or switching.AccessoriesConnect the APC ATS using 2x the AP9875, (C19-Schuko), AP9876 (C19-IEC309 16A) or AP9877 (C19-C20) and provide the ATS with a temperature and humidity sensor (AP9335TH). You can prevent loose power cords with a retention bracket the AP7769.Warranty extensionThe factory warranty of this APC Rackmount Automatic Transfer Switch is 2 years and can be extended to 3 years using WBEXTWAR1YR-AC-03.FeaturesAPC Rack Automatic Transfer Switch AP4423AInput: 230V, input connection type: C20 (2x)Output 230V, output connection type: C13 (8x) + C19 (1x)Max power: 3680WattIncludes: Rack mounting brackets, Serial Communication cable - RJ12 to female DB-9APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current, 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13, 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.

WiFi Smart EU Light Switch, 2-gang, Tuya compatible

WiFi Smart EU Light Switch, 1-gang, Tuya compatible

Product information "Foldable solar panel USB charger, 1x USB-A, 1x USB-C, 15W, IP65, black" from LogiLinkThis foldable solar panel made of monocrystalline silicon is the ideal companion for travelling. With its four fold-out solar modules and high conversion efficiency of up to 21 %, it provides reliable power for your devices. The maximum output of 15 W and the USB-A and USB-C outputs allow you to charge smartphones, tablets and other USB devices. Thanks to the IP65 waterproof design, the panel is also ready for use in adverse weather conditions. With its compact dimensions and low weight, the solar panel is easy to transport and store.

Product information "Foldable solar panel USB charger, 1x USB-A, 1x USB-C, 1x DC5521, 15W, IP65, black" from LogiLinkThis foldable solar panel made of monocrystalline silicon is the ideal companion for travelling. With its two fold-out solar modules and high conversion efficiency of up to 21 %, it provides reliable power for your devices. The maximum output of 30 W and the USB-A, USB-C and DC5521 outputs allow you to charge smartphones, tablets and other USB devices. Thanks to the IP65 waterproof design, the panel is also ready for use in adverse weather conditions. With its compact dimensions and low weight, the solar panel is easy to transport and store.

APC NetShelter Rack Automatic Transfer Switch (ATS) AP4424A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4424A is single phase 2U Rack ATS with 32A rated current, 230V rated voltage and 7400VA load capacity. It comes with inbuilt circuit breaker protection, 2 IEC 309 inlet and 16 IEC C13, 2 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.

This Schneider OffGrid Solar Panel Accessory provides reliable and versatile recharging of your portable power station, both at home or in off-grid situations. This 100W solar panel is compatible with all Schneider OffGrid Portable Power Station via DC connector. It comes with a 2 year warranty for your peace of mind.

This Schneider OffGrid Solar Panel Accessory provides reliable and versatile recharging of your portable power station, both at home or in off-grid situations. This 200W solar panel is compatible with Schneider OffGrid Portable Power Station 500 and 730 via DC connector. It comes with a 2 year warranty for your peace of mind.

The Cisco Meraki MT40 smart power controller is the latest addition to the MT sensor portfolio. MT40, combined with the rest of the MT family, provides remote visibility into physical conditions and equipment status and power consumption to minimize unplanned downtime, extend equipment lifespan, and benchmark energy usage to quantify sustainability initiatives. MT40, an inline power monitor, provides insight into power usage, intelligent alerting, and remote control of power status to improve sustainability, speed troubleshooting in remote deployments and streamline operations by enabling a more efficient response to power outages. Smart sensors. Smarter businessesMeraki MT sensors accelerate deployment, simplify management, and provide data-driven business outcomes. Wire-free installation, flexible mounting options, and automatic pairing make it easy to provision thousands of sensors in a short amount of time. Centralized cloud management and open APIs enable MT sensors to be managed alongside other networked devices or integrated with any business system.